Tuesday, August 15, 2017

Newton, IN: Tower: Aban/CIN/Erie vs. Aban/PC/Pennsy/Wab

(Satellite)
CIN was Chicago & Indiana Railroad. It evidently bought the Indiana part of the Erie when Conrail abandoned the western part of the Erie route as redundant with its NYC and Pennsy routes. A town never grew around this junction. The closest town is Laketon, IN. A 1963 topo map indicates the tower and a connecting track was in the northwest quadrant.

Josh Lemier posted
Here in this epic black and white photo we see Erie Lackawanna 3610 rock the diamond with the Penn Central passing Newton Tower at Newton, Indiana leading a manifest on an unknown date.
Photo Credit To David Oroszi.
Update:
Christopher Robert posted
EL, Newton, Indiana, 1976
Credit: John Bjorkland
Daniel C Carroll Jr. shared

Michael Dye posted
'WN Tower' diagram, dated JAN67, showing the 1959 single tracking, as well as the division of interlocking maintenance and operating costs between the Erie and PRR.
Michael Dye posted
Looking west at 'WH' Tower, during Erie RR single-tracking at Newton, IN. NOV59.
Photo by CL Coates, Foreman of Signal Gang #31, Erie RR.
Michael Dye posted
Looking east at 'WH' Tower, during Erie RR single-tracking at Newton, IN. NOV59.
Photo by CL Coates, Foreman of Signal Gang #31, Erie RR.
Note:
1. The signal mast having been moved to the center of the former EB tracks.
2. The cars to the left, sitting on the interchange track between the Erie main and the PRR Butler Branch line

Gary, IN: CN/EJ&E tracks moved for airport expansion

This satellite image shows the different shade of concrete where the runway has been made longer. Note that they had to build a new route along the north and west side of the expanded airport.

Satellite
An earlier image that I copied in Janurary of 2016 shows the runway was still being constructed.

Satellite
Once again, the Birds-Eye View is old enough to show the original alignment of the CN/EJ&E tracks.

Birds-Eye View
Since the bridge over Airport Road is now useless, it is going to be removed as part of rehabilitating Airport Road. [NWI]



xxx

Chicago Heights, IL: EJ&E Depot

(Satellite)

Bill Molony posted
The Elgin, Joliet & Eastern Railroad depot at Chicago Heights, as it looked on June 10, 1984.
Bill Molony It was on the north side of the EJ&E tracks and on the west side of Chicago Road - Route 1.

The Blackhawk Railway Historical Society posted
This is the Elgin, Joliet & Eastern Railroad's depot at Chicago Heights, as it looked on June 10, 1984.
Dwight Smith: When did the last passenger train stop there? I don't recall any when I was growing up there in the 1960's. I do remember the C & EI and, of course, the iconic green IC electric commuter trains.
The Blackhawk Railway Historical Society: This depot was never served by any passenger trains; it was strictly for freight traffic.

Bill Molony shared

Dennis DeBruler commented on Bill's share
According to a comment on another post and the photo, it was the rectangular building in the northwest quadrant of the intersection of Chicago Road and the EJ&E tracks. The tracks across the top were the Michigan Central.
https://clearinghouse.isgs.illinois.edu/webdocs/ilhap/county/data/cook/flight24/0bwq01036.jpg



Monday, August 14, 2017

Matteson, IL: Rail Park for CN's "Cloverleaf" Junction

Since CN bought both IC and EJ&E, they built connections in all four directions between the grade separated routes in Matteson, IL. The speed limit for the connection is 15mph.

Most railfans go to a rail park or junction to take pictures of trains. I go to take pictures of the park or junction so that I can better understand where other railfan have taken their pictures. If trains happen to arrive while I'm there, then I'll take pictures of trains also.

The first thing I discovered is that there is a lot of parking in the area, but it is all paid parking for commuters. That is my van that I ended up parking by the water tower. You can easily see the viewing pavilion beside the railroad embankment on the left and the static caboose display on the right. It is harder to see the wooden ramp up the hill in the middle of the photo.
20170207 7783
While I was taking a picture of the caboose, I heard diesel engines. It occurred to me I could get pictures of a static display later and I should get up to that viewing platform pronto. That is a rather long, steep ramp to try to hustle up. I grabbed the shot below at 4:08 while I was still going up the ramp. I at least documented that it was a westbound freight.

I was able to catch that it had two engines, but there is no way I can read the numbers from this distance even with 24 megapixels of resolution.
This rail park disappointed me even more than the one in Plant City, FL because you have very poor views of the EJ&E route, which had most of the freight action. Once I got up to the viewing platform, I could see over the buildings, but most of this view would be skunked by tree leaves during the tourist season. (This is February 7, 2017.)
I'm going to spend a while discussing the official railfan facility, but let me give you a sneak peak that there is a better place in town to catch the mainline trains.

Even this "window" of the EJ&E is probably a bummer when those bushes have leaves. I assume that is a sound abatement wall that is installed next to the track. Even if a train is using the connector ramp, that would be a source of frustration in terms of trying to get a clean shot.
While a freight was on the EJ&E route, I could determine a commuter was on the IC route. This was taken at 18mm.
But even with a telephoto and a sunny day, you would not get a good shot of that train.

Digitally zooming in on the IC route in the above photo
The end of the 2-engine westbound rolled through at 4:12.
This overview of the viewing platform catches another commuter at the Matteson station. The connector tracks are to the left of the platform. You can see one of the interpretive signs they have mounted along the railing. On the right is the wooden ramp that allows you to walk up to the platform.
I walked to the far end of the platform to get a view of the upper connections and more of the ramp.



I took pictures of each of the interpretive signs.




While I was taking those pictures, an engine running light passed through on the EJ&E route. The engine number appears to be 4904.
On my way back to the van, I took a picture of the caboose and its interpretive sign.

Since the viewing stand turned out to be a bummer in terms of viewing trains, I checked out 216th Street. I had barely gotten on 216th Place when an eastbound EJ&E came through. The best views I could get were not good, so I took only two pictures of it from inside the van. The covered hoppers look short so I think it was a unit sand train.



As I went north on 216th St, I noticed there were covered hoppers moving north on the IC route. I'll spare you a bunch of bad shots. I include this one to show what the best view was, which is not good.

I should have gone down that road to get closeups of some of the cars in the train. CN was using some real antiques including the faded car that still has IC reporting marks. Also, the train must have been going pretty fast because I was trying to catch the car to the left of that pole.
When the freight cleared, I could see another commuter. I was reminded that the IC uses electric power for its commuter trains.

I then checked out the other spot that was mentioned in a Trains Magazine article about railfanning this junction --- the Central Park Avenue crossing.
Since there are crossing gates for the connector as well as the EJ&E mainline, you can legally stand between them. This was the shot I could get before the crossing gates activated. I carry just an 18-55mm zoom. A real railfan with their macho zoom could have gotten a much better shot.
Now I have stepped aside because the gates are active.
A reminder that the EJ&E used to be owned by U.S. Steel. I never see this many coil cars on the BNSF/CB&Q Racetrack.
I just now noticed the GTW reporting mark on the engine.
You would have a really nice view of westbound trains.
I see more boxcars in this one view than I'll sometimes see in an entire train on the Racetrak.
And they kept on coming, including a Wisconsin Central fallen flag.
Wow, just one covered hopper and no tank cars. The Racetrack mixed trains are mainly covered hoppers and tank cars.
Since Matteson is the junction between IC and EJ&E, I'll include their static display of an IC caboose as well. I found this because I was checking out the abandoned Michigan Central Joliet Cutoff route, which is now Old Plank Road Trail. This is the view of the caboose from the trail.
Jan 2025 Update: Jesse B. Hill posted two photos with the comment: "Matteson, IL., on display and undergoing restoration."
1

2

This is the same spot on the trail but looking east along the trail.

There was a lot of train action, especially on the EJ&E. But the next time I go, I'll skip the viewing platform and go directly to the Main Street crossing.

Sunday, August 13, 2017

Mongo, IN: St. Joe Valley Line Depot, Bridge and School


Rural American History Captured posted
St. Joe Valley Line Station. Years of Operation 1906-1918. Mongo, IN
Debra Gould Collection
Normally I put bridge postings in the main blog, but I'm making an exception for this one.

Rural American History Captured posted
Mongo, Indiana. Post card. Looking south. Debra Gould Collection. Zoom in and you can see the train.
I drew a red line where I think the old St. Joe Valley RR ran:
Satellite plus Paint
Rural American History Captured posted, cropped
What a beautiful building! Hard to believe that this was in the lot beside the church.
Dennis DeBruler My grandfather, Russel Talmage, was born in 1900. I think he went to Brushy Praire for the lower grades. But he boarded with someone in Mongo to finish high school. I've been told that it was rare back then for a boy to get a high school diploma. Even though he lived on a farm, his mother was a strong believer in the importance of education.
[The grove is still there.]
Loralee Taylor Mongo only had 11 grades when the Talmage boys attended. Russell's diploma is from Fremont, and he boarded with a Brown relative. We think Ernest graduated from Kendallville.
Karla Miller Mom said both grandma and grandpa graduated from Kendalville. Grandpa roomed with a former neighbor and friend who had moved and grandma with her sister Ruth's family. Apparently he was valedictorian and also beat their best boxer and so was resented there. Said Uncle Charlie had taught both boys to box.


Friday, August 11, 2017

Mattoon, IL: GE Lighting Lamp Plant closed Aug 11, 2017

(Satellite)
GE already gave up on Illinois in 2015 in Dekalb where they used to build electric motors for appliances.

They are now (August 11, 2017) closing a 71-year-old factory in Mattoon that had a peak employment of 1,800. It is now down to 133. The article does not indicate if the factory was a union shop. [sj-r]

In 2013 they added 30 jobs when they employed 205 to increase the output of energy-efficient soft white bulbs.
Besides assembling energy-efficient soft white bulbs, the Mattoon plant also assembles:
— Automotive lighting.
— Halogen parabolic aluminized reflector bulbs used in recessed and track lighting.
— Multifaceted reflector bulbs used in residential and retail lighting.
— HIR lighting, which uses an infrared reflective coating.
[NewsGazette]
GE PR from NewsGazette

Dekalb, IL: GE closed the electric motor plant in 2015

(Satellite)

According to Lost Illinois Manufacturing, this plant had 1200 workers and made small electric motors. In a PM with Steve O'Conner, the plant closed in 2015. The plant started in 1946. Since these small motors were used in applications like appliances, that would indicate that the GE plants in Fort Wayne, IN were closed in favor of this new plant in DeKalb. (GE in Fort Wayne is on the todo list, but don't hold your breath. It used to have five plants. It is now gone.)

Street View

Dave Kuntz posted
Seen many times before here but always loved. The Peace Road tracks.
Dan Davis Precious piece of the Gary line. I heard this ge plant was used to build rudimentary radio controlled drones during WW2 and bombers would fly them out of the DeKalb airport which explains the unusually long runway for such a small airport.
Stephen Karlson Yes, before Peace Road went in, there was a ramp between the cruise missile factory and the airfield for the War Department to take delivery.
At least one of the cruise missiles delivered a payload onto the Japanese naval base at Rabaul.

More information about the WWII role this factory building played.
Martin O'Connor posted
Peace Road at Pleasant St in DeKalb, c1984
GE plant (Former Interstate Aircraft WWII drone factory) is out of frame to the left of the abandoned Gary Line tracks. Light colored concrete pad where the four high-wings are parked in center of photo is where the large DKB municipal hangar once stood.